Remote Control Buttons; Id Button; Camera Buttons; Sequence Button - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual

Remote Control Buttons

NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.

ID Button

If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System Information setup screen in this chapter for further information on setting the System ID.) If the
system ID is 1 to 16, you must to press the
control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared remote control
at the same time.

Camera Buttons

Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also
used to enter passwords.

Sequence Button

When in the Live Monitoring mode, pressing the

Freeze Button

Pressing the button freezes the current live screen.
FREEZE
10
Figure 4 — Infrared remote control.
button and then press the number button (1 to 16 (+10 & 6)) in order to
ID
button displays live channels sequentially.
SEQUENCE
ID Button
Camera Buttons
Sequence Button
Freeze Button
Arrow Buttons
Menu Button
Playback Buttons
Panic Button
Layout Button
Zoom Button
PTZ Button
Enter Button
Alarm Button
PTZ Control Buttons
Back Up Button
Calendar Button