Figure 44 - Alarm-In Settings Screen; Figure 45 - Alarm-In Actions Screen - Eneo DLR-2016/500V Operating Instructions Manual

Figure 44 — Alarm-In Settings screen.
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm input connectors. Highlight
the box beside Panic Record and press the
alarm input you want associated with panic recording. The DVR will continue panic recording until an input on the
selected alarm input is released as long as the
Highlight the Actions tab, and the Alarm-In Actions setup screen appears.
Figure 45 — Alarm-In Actions screen.
Highlight the desired box under the Alarm-Out heading, and press the
appear. Select the Alarm Output connectors that you would like to activate whenever the DVR detects an input on the
associated alarm input. You can also set the DVR's internal buzzer to sound.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the
Highlight the desired box under the PTZ heading, and press the
preset position for each PTZ camera, where you want PTZ cameras to move to whenever the DVR detects an input on
the associated alarm input.
The alarm terminal strip on the back of the DVR has inputs
associated with each alarm. You can set up each input on
the Alarm-In screen. You can turn each input On or Off by
highlighting the alarm number and pressing the
Each input can be given a title. Highlight the desired Title
box and press the
allowing you to enter a title name.
Each input can be set as NO (normally open) or NC (normally
closed).
button. A list of Alarm Inputs appears, and you can select which
button is not pressed to stop the panic recording.
PANIC
You can set the actions the DVR will take whenever it senses
an input on one of its alarm input connectors.
Highlight the desired box under the Record heading, and press
the
that you want the DVR to record whenever it detects an input
on the associated alarm input.
NOTE: For the Record action, the camera you select should
You can toggle the entire list On and Off by highlighting Notification and pressing
the button. You can toggle the individual items On and Off by highlighting
that item and pressing the
to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in
the Notification setup screen and the DVR should be registered in the
RAS (Remote Administration System).
16-Channel Digital Video Recorder
button. A virtual keyboard appears
button. A list of cameras appears. Select the cameras
be set to the Event or Time & Event recording mode
in the Record Schedule setup screen.
button. A list of Alarm Outputs and Beep
button. The Alarm-In Notify menu appears.
button. Highlight OK and press the
button. A list of PTZ presets appear. Select the
button.
button
37