Notification; Figure 24 - Rtsp Setup Screen; Figure 25 - Webguard Setup Screen - Eneo DLR-2016/500V Operating Instructions Manual

Figure 24 — RTSP setup screen.
Highlight Use Mobile and press the
DVR using a Blackberry or other mobile devices.
NOTE: Selecting Use Mobile sets the WebGuard service to be enabled automatically regardless of your WebGuard
settings.
You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter "rtsp://ID:Password@IP
address:RTSP port number/track ID='channel number'", or start Internet Explorer on your Blackberry
or other mobile devices and enter "http://IP address:Webguard port number/".
RTSP service might not be supported, depending on the type of media player.
Highlight the WebGuard tab, and the WebGuard screen displays.
Figure 25 — WebGuard setup screen.

Notification

The DVR can be set up to send an email or to contact a computer running RAS (Remote Administration System) when
an event occurs.
Highlight Notification in the Network menu and press the
be able to change the Mail and Callback settings.
Highlight Enable RTSP (Real-Time Streaming Protocol) and
press the
will be able to change the settings if Enable RTPS is enabled.
Highlight the box beside RTSP Port and press the
button. Set the port number of the RTSP server obtained from
your system administrator.
Highlight the box beside RTP Start Port and press the
button. Set the start port number of the RTP server obtained
from your system administrator.
Highlight the box beside RTP End Port and press the
button. Set the end port number of the RTP server obtained
from your system administrator.
button to toggle between On and Off. When set to on, you can access a remote
Highlight Use WebGuard Service and press the
to toggle between On and Off. See Appendix – WebGuard
for detailed descriptions of the WebGuard service.
Highlight the box beside Port and press the
the port number used when accessing WebGuard by using
the Up and Down arrow buttons to increase or decrease the
numbers.
button. The Notification screen displays. You will
16-Channel Digital Video Recorder
button to toggle between On and Off. You
button
button. Set
27