Figure 55 - Health Check Screen; Figure 56 - Storage Screen - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual
Figure 55 — Health Check screen
Highlighting the box under the Interval heading beside each alarm-in and pressing the
the interval that you want the DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30 days or Never.
Highlight the Storage tab, and the Storage screen displays.
Figure 56 — Storage screen.
Highlight the second box beside Disk S.M.A.R.T., and press the
and press the button.
Highlight the Actions tab, and the System Event Actions screen displays.
44
The DVR can be configured to run self-diagnostics and report
the results.
Highlighting the box beside System and pressing the
button allows you to select the interval that you want the DVR
to run self-diagnostics on the system. You can select from
1 hr. to 30 days or Never.
Highlight the Setup... box beside Check Recording and press the
button. The Check Recording screen appears.
Highlighting Schedule On and pressing the
Off. When set to On, you can select the day, time range and interval that
you want the DVR to run self-diagnostics on the recorder. The Interval
can be selectable from 1 min. to 7 days or Never. The
you to delete a check recording schedule.
Highlight the box beside Disk Bad Notify, and press the
button. Select percentage level of bad disk sectors at which
you want the DVR to trigger an alert. Percentage levels range
from 10% to 90%.
Highlight the box beside Disk Almost Full Notify, and press
the button. Select the percentage level of disk usage at
which you want the DVR to trigger an alert. Percentage levels
range from 80% to 99%.
Highlight the first box beside Disk S.M.A.R.T., and press the
button. Use the Up and Down arrow buttons to scroll
through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature
setting. If the temperature of hard disk drive exceeds the defined
threshold, the system triggers an alert.
button. Select either ºC (Celsius) or ºF (Fahrenheit),
button toggles On and
box allows
button allows you to change