Epson TM-C3500 Series Technical Reference Manual page 92

• Module:
Category
Plain,
Plain label
Synthetic label
Matte
Matte label
Glossy label
Wristband
- : Not supported
*1: In some cases, dot missing and irregularity in ink shots may occur when printing ladder
barcodes (when the barcodes from the start to stop are printed in a vertical direction),
lowering the ANSI grade to F and making barcodes unrecognizable. Therefore, fence
barcodes (when the barcodes from the start to stop are printed in a horizontal direction)
are recommended to use. To use ladder barcodes, make consideration such as printing
HRI characters.
*
2: Ink may penetrate the paper due to its characteristics, and bars of printed barcodes tend to
become thicker. This tendency is more prominent with some papers. To maintain the
barcode recognition rate, use methods such as reducing the data in a bar by 1 pixel and
increasing the blank space by 1 pixel (Bar width adjustment). However, do not apply this
method to 2-dimensional symbols.
92
Sets the thin element width in dots.
Graphic resolu-
Print
tions
direction
(Horizontal x
*1
vertical) (dpi)
Fence
360 x 360
Ladder
Fence
360 x 360
Ladder
Fence
720 x 360
Ladder
Upper Line: Minimum Mod-
ule [by 360 dpi]
Lower Line: Minimum Ele-
Adjust
ment Ratio
Bar
ANSI ANSI
Width *2
Grade Grade
D or C or
higher higher
4 dot
2.5
6 dot
2.5
3 dot
2.5
Required
6 dot
- (*3)
2.5 (*3)
3 dot
2.5
6 dot
- (*3)
2.5 (*3)
ANSI
Grade
B or
higher
- -
- -
4 dot
2.5
-
4 dot
2.5
-