Epson TM-C3500 Series Technical Reference Manual page 105

• DataMatrix(Rectangle)
Cell Size:
Number of Vertical Cells:
Number of Horizontal Cells:
❏ The following table shows the recommended value for the 2D symbol module.
• Recommended value for setting the barcode/2D symbol font (2D symbol of stack type)
(PDF417, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar
Expanded Stacked)
Graphic reso-
lutions
Category
(Horizontal x
vertical) (dpi)
Plain,
360 x 360
Plain label
Synthetic
360 x 360
label
Matte
Matte label
Glossy label
720 x 360
Wristband
- : Not supported.
*
1 : Whether paper feed is performed during printing 2D symbol can be checked in [Display
Media Feed Position] - [Display Print Preview] in the Print Preview function. For this
function, see "Print Preview" on page
*2: Specify when using PDF417.
Makes settings of the cell (module) size for DataMatrix.
Specify the number of cells for DataMatrix in the vertical direction.
Specify the number of cells for DataMatrix in the horizontal direction.
[Minimize]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.
Print Status Adjust Bar
(*1) Width (*2)
No Paper
feed
With Paper
feed
No Paper
feed
3
With Paper
feed
No Paper
feed
With Paper
feed
111.
Chapter 3 Handling
Minimum Module
[by 360 dpi]
ANSI ANSI
Grade D Grade C
or or
higher higher
6 dot -
6 dot -
4 dot -
4 dot - (*2)
4 dot -
4 dot - (*2)
ANSI
Grade B
or
higher
-
3
-
-
-
-
-
105