Media type
Media source
Backing paper width
Label width
Label length
Gap between labels
Left and right outer edges
Edge cutoff width
Label edge R
Width of a black mark
Length of a black mark
Center of a black mark
Gaps between black marks
Paper thickness
Paper core
External diameter
Winding direction
Form of perforated line
Do not use the paper with a hole or cutout.
For the black mark position of the die-cut label paper, match the label edge to the black
mark edge.
You can use paper with all fringes removed or paper with fringes on the left and right
removed.
Plain label / Matte label / Glossy label
Roll paper
30 to 112 mm {1.18 to 4.41"}
25.4 to 108 mm {1 to 4.25"}
8 to 1,117.6 mm {0.32 to 44"}
3 to 6 mm {0.12 to 0.24"}
2 mm 0.5 mm {0.079 0.02"}
1.5 mm or more
1.5 mm {0.059"} or less
13 mm {0.51"} or more
4 mm {0.16"} or more
(with a width of at least 4 mm around)
8.5 mm 1 mm {0.33 0.039"}
11 to 1,123.6 mm {0.43 to 44.24"}
Plain label / Matte label:
0.129 to 0.143 mm {0.005 to 0.006"}
Glossy label:
0.184 mm {0.007"}
Plain label:
outer diameter 44.1 mm {1.74"} or more
Matte label / Glossy label:
outer diameter 56.8 mm {2.24"} or more
Maximum 101.6 mm {4"}
Printing face must be facing outside.
Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
PET film
: 0.6 mm uncut, 8.4 mm cut
Chapter 6 Appendix
211
5