Beeper
When an error occurs while "Beep Notification Setting at an Error" is enabled, the beeper
performs "Sound the beeper on an error" shown in the below table. The beeper continues to
beep until all the causes of error are removed.
When "Settings For Paper Handling After Print" - "Notification" is enabled, the printer performs
"Beeper sound when the printer is not in an error state" shown in the below table.
❏ Frequency:
❏ Volume control:
Sounding
Silent
period
period
500ms
300ms
300ms
-
The volume can be set using the DIP switch. See
When the paper is in "Paper out" status, which is without printing data, the beeper does
22
Fixed to approximately 2.5 kHz
2 levels on the hardware
Number of
Overall
the pattern
time
repeated
3
5 seconds
None
48.
not sound.
Number of
times
repeated
Sound the beeper on an error
Service required
Printer error
Roll paper cover open
Ink cartridge cover open
Replace ink cartridge
No ink cartridge
Ink cartridge read error
Until the
Maintenance box cover open
error factor
Replace maintenance box
is removed.
No maintenance box
Maintenance box read error
Media form error
Media size error
Paper jam error
Paper removal error
Paper out error
Beeper sound when the printer
is not in an error state
-
1
Every page
The final page only
"Setting the DIP Switches" on page
Printer event