Paper Specifications - Epson TM-C3500 Series Technical Reference Manual

Paper Specifications

The following is the type and the size of paper specified for this printer.
 When using paper other than the specified, users must evaluate the recognition rate in
advance to avoid deterioration of the paper feed accuracy/barcode recognition rate/print
quality and frequent occurrence of paper jams.
 Depending on the temperature and humidity, the synthetic labels and paper backing
have different ratios of expansion and contraction, and this causes the paper to curl. If
the paper curls, the paper may be rubbed by the print head and become contaminated,
or the paper may jam.
 Do not use the paper which is extended by connecting with tape and others. The paper
may be detected incorrectly by the connected line, and rubbed by the print head and
become contaminated, or the paper may jam.
Paper type
Continuous paper
Continuous paper (Blackmark)
Continuous paper (Blackmark)
Full-page label
Transparent full-page label
Die-cut label (Gap)
Transparent die-cut label
Die-cut label (Blackmark)
Die-cut label (Blackmark)
Wristband
204
Category
Plain Roll paper
Matte
Plain Roll paper
Matte
Plain Fanfold paper
Matte
Plain label Roll paper
Matte label
Synthetic label
Glossy label
Plain label Roll paper
Matte label
Synthetic label
Glossy label
Plain label Roll paper
Matte label
Glossy label
Plain label Fanfold paper
Matte label
Wristband Roll paper
Form Width
30 to 108 mm
{1.18 to 4.25"}
(Paper width)
30 to 108 mm
{1.18 to 4.25"}
(Paper width)
50 to 108 mm
{1.97 to 4.25"}
(Paper width)
25.4 to 108 mm
{1 to 4.25"}
(Label width)
25.4 to 108 mm
{1 to 4.25"}
(Label width)
25.4 to 108 mm
{1 to 4.25"}
(Label width)
46 to 108 mm
{1.81 to 4.25"}
(Label width)
30 mm {1.18"}
(Paper width)