Epson TM-C3500 Series Technical Reference Manual page 74

22
Insert the fanfold paper into the paper slot, facing the print surface
upward. Insert the paper until it is pulled into inside the printer (approxi-
mately 100 mm {3.94"}). The printer detects the edge of the fanfold
paper, pulls it inside, and then starts feeding it to the print starting posi-
tion.
When "Paper loading at roll paper cover close" is set to "With cutting", the paper is auto-
matically cut after fed. (See
23
Place the stack of fanfold paper straight at least 40 mm {1.57"} away
from the back of the printer.
74
"Paper Loading Settings" on page 120.)