When "Borderless Printing" is enabled
Top, bottom, left, right margins: 0 mm (Typical value)
Center of paper width
Auto-cut position
Auto-cut position
If you enabled "Borderless Printing", printing is done with settings for no margins, but the
printing might protrude beyond the paper/label, depending on the actual print position
and the set position for the paper/label. To make sure printing does not protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
Even if "Borderless Printing" is enabled, the maximum value for the print area width is
104 mm {4.09"}.
218
Print area width
Print area width
Paper feeding direction
Print area
Paper
Black mark position