Print Start Position Adjustment (Vertical Direction)
The paper feed pitch is adjusted as described below depending on the [Media detection settings].
Media detec-
tion settings
Die-cut label
(Gap)
Transparent die-
cut label
Die-cut label
(Blackmark)
134
Specifying a positive value moves the print start position and cut position
away from the reference position (top of label).
Specifying a negative value moves the print start position and cut position
closer to the reference position (top of label).
Backing paper
Label
Print result
Label
Specifying a positive value moves the print start position and cut position
away from the reference position (blackmark position).
Specifying a negative value moves the print start position and cut position
closer to the reference position (blackmark position).
Backing paper
Label
Print result
Label
Description
Print reference
(Top of label)
Print start position
Cut position
Print reference
(Black mark position)
Print start position
Cut position