Epson TM-C3500 Series Technical Reference Manual page 147

Trouble
The label size and
It is product specifica-
printable area do not
tions
match
I want to perform bor-
-
derless printing
The print position may
Print position and cut be misaligned
position are misaligned depending on the
paper you are using.
Description
On the [General] tab, if you select
[User Defined...] in Media Layout
but do not select [Borderless Print-
ing], the area minus the 1.5 mm
margins around the label becomes
the printable area.
Enable [Borderless Printing] if you
want to use the whole label size as
the printable area.
When [Borderless Printing] is
enabled, images may be printed
on the backing paper; therefore,
remove the 1.5 mm margin on all
edges from the print data.
To perform borderless printing, use
the label that is cut in half and still
has edge cutoffs. Specify a print-
able area that is larger than the
actual label size and print.
See "Setting the label size and
paper layout for borderless printing"
on page 172
Adjust the position.
On the printer driver's [Printer Utili-
ties] tab, click [Printer Setting Utility].
When the PrinterSetting screen is
displayed, click [Printer Adjustment]
and perform [Paper Feed Adjust-
ment].
You can perform [Cut Position
Adjustment] [Print Start Position
Adjustment (Vertical Direction)],
and [Print Start Position Adjustment
(Horizontal Direction)].
See "Paper Feed Adjustment" on
page
Chapter 3 Handling
Recovery method
on page.
129.
Image/
Illustra-
tion
-
3
-
-
147