When "Borderless Printing" is enabled
Top, bottom, left, right margins: 0 mm (Typical value)
Center of paper width
Perforated line
Auto-cut position
Auto-cut position
Perforated line
Auto-cut position
Edge cutoff 2.0 mm
If you enabled "Borderless Printing", printing is done with settings for no margins, but the
Even if "Borderless Printing" is enabled, the maximum value for the print area width is
228
Paper width
Print area width
Edge cutoff 2.0 mm
*1 When auto cut is not performed: 8.0 mm or more
*2 When auto cut is not performed:11.0 mm or more
printing might protrude beyond the paper/label, depending on the actual print position
and the set position for the paper/label. To make sure printing does not protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
104 mm {4.09"}.
Paper feeding
direction
Print area
Label area
Backing paper
Black mark
position