Table of Contents
Advertisement
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
f SSID has to be entered in alphanumeric letters.
f You cannot set "any" or "ANY" for SSID.
f The projector settings are not required when MIRRORING is connected. For details about MIRRORING, please refer to
"About MIRRORING" (x page 123).
f The following settings are set before the projector leaves the factory.
Computer settings
1)
Turn on the computer.
2)
Make the network setting according to your system administrator.
f If you select [M-DIRECT] in [WIRELESS LAN], the IP address will automatically be acquired.
f If you select [USER1] ~ [USER3] in [WIRELESS LAN], then make the network settings for the computer and the
projector according to your system administrator.
3)
Connect the computer to the network that has been set for the projectors.
f If you use a Windows computer, click
name as the SSID that has been set in the projector when you select [M-DIRECT] in [WIRELESS LAN], or select the
same name as the SSID that is used in current access point when you select [USER1] ~ [USER3] in [WIRELESS LAN].
If you use a Mac computer, click
SSID that has been set in the projector.
f When you select default settings of [M-DIRECT] for [WIRELESS LAN] in the network menu, the SSID is [M-DIRECT +
The last 4 digits of the network ID].
Note
f If you use any wireless LAN connection utility that meets the OS standard, follow the operation instruction of the utility to
connect it.
Accessing from the web browser
1)
Start up the web browser on the computer.
2)
Enter the IP address set on the projector into the URL entry field of the web browser.
3)
Enter the user name and the password.
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is
panasonic (lower case).
Chapter 4 Settings - [NETWORK/USB] menu
[KEY]
proj + The last 4 digits of the network ID
[NORMAL] → [M-DIRECT]
[IP ADDRESS]
192.168.12.100
[SUBNET MASK]
255.255.255.0
[SSID]
M-DIRECT + The last 4 digits of the network ID
[CHANNEL]
1
[KEY]
The same string as the SSID
[NORMAL] → [USER1] ~ [USER3]
[SSID]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[AUTHENTICATION]
[ENCRYPTION]
[DNS1] / [DNS2]
on the task tray (bottom right of the Windows screen), then select the same
on the menu bar (top right of the Mac screen), then select the same name as the
[SIMPLE]
Panasonic Projector
OFF
192.168.11.100
255.255.255.0
192.168.11.1
OPEN
NONE
NONE
ENGLISH - 99
Advertisement
Table of Contents
