Table of Contents
Advertisement
f The items will switch each time you press the button.
[SXGA]
[SXGA +]
[P-TIMER]
Set and operate the presentation timer function.
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
[MODE]
[TIMER]
[START] / [STOP] /
[RESTART]
[RESET]
[EXIT]
Setting [MODE]
1)
Press as to select [MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Setting the countdown timer
1)
Press as to select [TIMER].
2)
Press qw to set the timer.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
Note
f [TIMER] is available only when [MODE] is set to [COUNT DOWN].
The operation of [P-TIMER]
1)
Press as to select one item.
[START]
[STOP]
[RESTART]
[RESET]
2)
Press the <ENTER> button.
f When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right of
the projected image.
f When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in the
lower right of the projected image.
Note
f You can also use the P-TIMER function by pressing the <P-TIMER> button on the remote control (x page 54).
f If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXT
DISPLAY] (x page 86) is set to [ON].
f The elapsed time or remaining time will not be displayed when the menu screen is displaying.
f The start time will be "000:00" when [MODE] is set to [COUNT UP].
f When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
Ending the presentation timer
1)
Press as to select [P-TIMER].
74 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Normal setting.
Set this when the edge of the image is cropped.
Switches the elapsed time between [COUNT UP] and [COUNT DOWN].
Sets the finish time of timer when [COUNT DOWN] is selected.
Operates the timer.
Resets the count.
[P-TIMER] is finished.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].
The count is started.
The count is stopped.
The count is resumed.
The count is reset.
Advertisement
Table of Contents
