Table of Contents
Advertisement
1 [PROJECTOR TYPE]
Displays the type of projector.
2 [PROJECTOR NAME]
Displays the name set in the projector.
3 [MAIN VERSION]
Displays the firmware version of the projector.
4 [POWER]
Displays the status of the power.
5 [PICTURE MODE]
Displays the status of the picture mode.
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [NETWORK VERSION]
Displays the version of firmware of the network.
8 [AV MUTE]
Displays the AV mute status.
9 [VOLUME]
Displays the volume status.
10 [INPUT]
Displays the status of the selected input.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to
display the error/warning details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
r [FAILED] items displayed when a problem occurs
Parameter
[FAN]
[FAN(INTAKE)]
[FAN(EXHAUST)]
[FAN(LAMP)]
[INTAKE AIR TEMPERATURE]
[EXHAUST AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
102 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Chapter 4 Settings - [NETWORK/USB] menu
PT-VW355N
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
Trouble has occurred in the intake fan.
Trouble has occurred in the exhaust fan.
Trouble has occurred in the lamp cooling fan.
The air intake temperature is too high. The projector may be used in an operating
environment where the temperature is high, such as near a heating appliance.
The exhaust air temperature is high. The air exhaust port may be blocked.
The temperature around the optics module inside the projector is high. The projec-
tor may be used in an operating environment where the temperature is high, such
as near a heating appliance.
11 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the
projector.
12 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
13 [OPTIC MODULE TEMPERATURE]
Displays the optics module temperature status of the
projector.
14 [LAMP RUNTIME]
Displays the runtime of the lamp (converted value).
15 [SELF TEST]
Displays the self diagnostics information.
16 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
Description
Advertisement
Table of Contents
