Table of Contents
Advertisement
5)
Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel to exit playing.
f Exit the full screen display, and the Memory Viewer screen (in list display) is displayed.
f If you want to continue to play another file, please perform the step 1) to 4) again.
Note
f When Memory Viewer screen is displayed, each time you press the <AUTO SETUP/CANCEL> button on the remote control
or the <EASY SETTING/CANCEL> button on the control panel, the cursor will move between the folder list area and the
thumbnail (or list) display area.
f The display order of the list is in accordance with the setting of [NETWORK/USB] menu → [MEMORY VIEWER] → [SORT].
(x page 94)
Playing the still image
Introduce the procedure to the example of the operation in the MEMORY VIEWER screen of [THUMBNAIL] display method.
In the case of the MEMORY VIEWER screen of [LIST] display method, you can play with the same procedure other than the
selection operation of file.
When the automatic playback function is enable
Introduce the procedure of the operation under the [MEMORY VIEWER] menu → [AUTOPLAY] is set to [ON] (x page 94).
In this case, all still image files in the same folder are played back automatically according to the settings in the [MEMORY
VIEWER] menu (x page 94) → [INTERVAL] and [EFFECT].
1)
Press asqw to select a file which you want to play first from the thumbnail, and then press the
<ENTER> button.
f It will start playing in full screen.
f Press the <ENTER> button again, the play will stop temporarily. If you want to continue the play, press the button again.
f After playback ends, playback of the next file starts.
f Press w during playing, it will skip the current playing and automatic play from the next file.
f Press q during playing, it will continue automatic play back to the previous file.
f Press a during playing, the image will be rotated 90 ° in the clockwise direction while maintaining the aspect ratio.
f Press s during playing, the image will be rotated 90 ° in the counterclockwise direction while maintaining the aspect
ratio.
2)
Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Exit the automatic playback and returns to the MEMORY VIEWER screen (thumbnails).
When the automatic playback function is disable
Introduce the procedure of the operation under the [MEMORY VIEWER] menu → [AUTOPLAY] is set to [OFF] (x page 94).
In this case, it will play a file one by one.
1)
Press asqw to select a file from the thumbnail, and then press the <ENTER> button.
Chapter 5 Operation of Function - Memory Viewer function
Display example of auto playing (still image)
Operation Guide
ENGLISH - 119
Advertisement
Table of Contents
