Using The Freeze Function; Using The Av Mute Function; Using The P In P Function - Panasonic PT-VW355N Operating Instructions Manual

Lcd projector
Hide thumbs Also See for PT-VW355N:
Table of Contents

Advertisement

Chapter 3 Basic Operations - Basic operations by using the remote control

Using the FREEZE function

You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1)
Press the <FREEZE> button on the remote control.
f The video is paused and the audio is muted. [FREEZE] is displayed on the lower left of the screen during FREEZE.
2)
Press the <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Note
f When no signal input, [KEY NOT APPLICABLE] message will appear.
f When [MIC] is set to [ON], the audio of MIC can be output even during FREEZE.

Using the AV MUTE function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1)
Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2)
Press the <AV MUTE> button again.
f The audio and image turn on.
Note
f When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.

Using the P IN P function

(Only for PT-VW355N)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen [P IN P] / a
small sub screen side by side with the main screen [SIDE BY SIDE]).
button
1)
Press the <P IN P> button on the remote control.
f Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]).
INPUT A
Note
f For details, refer to [P IN P] (x page 75).
Switch the input source
You can switch the input source of the main screen and sub screen while the P IN P function is operating.
r Switch the input source of the main screen
Switch the input source as the same operation as the single screen.
r Switch the input source of the sub screen
When two screens are displayed (when no menu is displayed), press the <ENTER> button, the red frame of the sub screen
will be displayed. Switch the input source as the same operation as the single screen.
Main screen
INPUT A
INPUT B
Sub screen
Main screen
INPUT A
INPUT B
Sub screen
ENGLISH - 53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx425n

Table of Contents