[Network/Usb] Menu; Confirmation Of The Network Information; [Wired Lan] - Panasonic PT-VW355N Operating Instructions Manual

Lcd projector
Hide thumbs Also See for PT-VW355N:
Table of Contents

Advertisement

[NETWORK/USB] menu

On the menu screen, select [NETWORK/USB] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.

Confirmation of the network information

When connecting the "Wireless Manager ME6.3", the dedicated application of iPad/iPhone/iPod touch/Android, or the Intel
WiDi / Intel
Pro WiDi / Miracast compatible device to a projector, the information such as the Network number of Wireless
®
LAN, Projector name and Network ID are required. You can confirm the information in the [STATUS] in the [NETWORK/USB]
menu. (x page 95).

[WIRED LAN]

You can make detailed wired LAN settings.
1)
Press as to select [WIRED LAN].
2)
Press the <ENTER> button.
f The [WIRED DETAILED SETUP] screen is displayed.
3)
Press as to select an item, and change the setting according to the instructions.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
4)
Press as to select [OK], and press the <ENTER> button.
r Default wired LAN settings
f The following settings are set before the projector leaves the factory.
Note
f When using a DHCP server, confirm that the DHCP server is running.
f Consult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
f A wired LAN and wireless LAN cannot be used in the same segment.
88 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
[ON]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[OFF]: If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY].
Enter the IP address if DHCP server is not used.
Enter the subnet mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not used.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]/[DNS2]
OFF
192.168.10.100
255.255.255.0
192.168.10.1
NONE
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx425n

Table of Contents