Table of Contents
Advertisement
r Default setting of [USER1], [USER2], [USER3]
f The following settings are set before the projector leaves the factory.
[CONNECTION LOCK]
You can switch the input signal between Panasonic APPLICATION, MIRRORING and MEMORY VIEWER, or choose one fixed
input signal from three of them.
1)
Press as to select [CONNECTION LOCK].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[Panasonic APPLICATION] The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[MIRRORING]
[MEMORY VIEWER]
Note
f If [CONNECTION LOCK] is set to one fixed item other than [OFF] and you press other buttons, the [KEY NOT APPLICABLE]
appears.
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1)
Press as to select [NAME CHANGE].
2)
Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
3)
Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the <ENTER> button.
f To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
Note
f [Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
1)
Press as to select [PASSWORD].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f Set to [ON] to perform password check when connecting with the projector using "Wireless Manager ME6.3".
(Default: [OFF])
f When using the deliver image to all function or the delivered image deletion function of the "Multi Projector Monitoring &
Control Software", image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].
92 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
[SSID]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[AUTHENTICATION]
[ENCRYPTION]
[DNS1]/[DNS2]
The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION],
[MIRRORING] and [MEMORY VIEWER].
The [MIRRORING] is the fixed [NETWORK/USB] input signal.
The [MEMORY VIEWER] is the fixed [NETWORK/USB] input signal.
Disables the entry of network password.
Enables the entry of network password.
Panasonic Projector
OFF
192.168.11.100
255.255.255.0
192.168.11.1
OPEN
NONE
NONE
Advertisement
Table of Contents
