Table of Contents
Advertisement
Communication
distance
Wireless
LAN
Security
*1 When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], the network
function (both wireless LAN and wired LAN) cannot be used in standby mode.
*2 When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], only the
Wake on LAN function can be used in standby mode via wired LAN. When the [PROJECTOR SETUP] menu → [ECO
MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], the power consumption is normally within 6 W in standby
status. If the input source was switched to [MEMORY VIEWER] or [Panasonic APPLICATION] before the projector turns
into standby, the power consumption in standby status may be more than 6 W.
*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4 For details of video signals that can be projected using this projector, refer to "List of compatible signals". (x page 141)
*5 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*6 This is an average value. It may differ depending on individual product.
*7 [LAMP POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C to 40 °C.
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
Dimensions
<Unit : mm (inch)>
113.0 (4-7/16")
Actual dimension may differ by product.
148 - ENGLISH
Chapter 7 Appendix - Specifications
Approx. 30 m (98'5") (depends on the usage environment)
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),
WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
24.4 (31/32")
326.0 (12-27/32")
352.0 (13-27/32")
198.0 (7-25/32")
Advertisement
Table of Contents
