Contents Of Mail Sent - Panasonic PT-VW355N Operating Instructions Manual

Lcd projector
Hide thumbs Also See for PT-VW355N:
Table of Contents

Advertisement

1 [Auth]
Select the authentication method specified by your
Internet service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP
server.

Contents of mail sent

Example of E-mail sent when E-mail is set
Mail with the contents shown below is sent when the e-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type
Serial No
-----
TEMPERATURE WARNING SETUP
MINIMUM TIME
INTAKE AIR TEMPERATURE
ERROR
LAMP RUNTIME
LAMP RUNTIME
INTAKE AIR TEMPERATURE [ OFF ]
-----
FAN
INTAKE AIR TEMPERATURE
EXHAUST AIR TEMPERATURE
OPTICS MODULE TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE (CONTRAST-SHUTTER)
AIR FILTER
(Error code 00 00 00 00 00 00 00 00)
Intake air temperature
Exhaust air temperature
Optics module temperature
PROJECTOR RUNTIME
LAMP
LAMP
LAMP
-------- Current status ---------
MAIN VERSION
NETWORK VERSION
SUB VERSION
LAMP STATUS
INPUT
SIGNAL NAME
SIGNAL FREQUENCY
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Wireless Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
108 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Chapter 4 Settings - [NETWORK/USB] menu
: PT-VW355N
: 000000000
E-mail setup data -----
at [ 60] minutes interval
Over [ 32degC / 89degF ]
[ OFF ]
[ OFF ]
[ OFF ]
check system -----
: 31 degC /
: 37 degC /
: 39 degC / 102 degF
800 H
NORMAL
500 H
ECO
700 H
REMAIN
4000 H
1.00
1.00
1.00
LAMP=ON
RGB
XGA6
0.00kHz / 0.00Hz
OFF
192.168.10.100
04:20:9A:00:00:00
OFF
192.168.0.100
04:20:9A:00:00:00
5 [Password]
Enter the password for the POP server or the SMTP
server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit]
Update the settings.
at REMAIN [ 400] H
at REMAIN [ 200] H
[
OK
]
[
OK
]
[
OK
]
[
OK
]
[
OK
]
[
OK
]
[
OK
]
[
OK
]
87 degF
98 degF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx425n

Table of Contents