[Connection Lock]; [Name Change]; [Password]; [Password Change] - Panasonic PT-VW345NZ Operating Instructions Manual

[CONNECTION LOCK]

Switches the network signal or chooses one fixed signal.
1) Press as to select [CONNECTION LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[OFF]

[Panasonic APPLICATION] The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[Miracast(TM)]
[MEMORY VIEWER]
Note
f If [CONNECTION LOCK] is set to one fixed item other than [OFF] and you press other buttons, the [KEY NOT APPLICABLE]
appears.

[NAME CHANGE]

You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry field.
4) Select [OK] with the as buttons and press the <ENTER> button.
f To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
Note
f [Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.

[PASSWORD]

By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Set to [ON] to perform password check when connecting with the projector using "Wireless Manager ME6.0".
(Default: [OFF])
f When using the deliver image to all function or the delivered image deletion function of the "Multi Projector Monitoring &
Control Software", image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].

[PASSWORD CHANGE]

1) Press as to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the <ENTER> button.
Note
f You can enter 8 characters at most.
f Change the password periodically that is hard to guess.
Chapter 4 Settings - [NETWORK/USB] menu
The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION],
[Miracast(TM)] and [MEMORY VIEWER].
The [Miracast(TM)] is the fixed [NETWORK/USB] input signal.
The [MEMORY VIEWER] is the fixed [NETWORK/USB] input signal.
Enables the enter of network password.
Disables the enter of network password.
ENGLISH - 89