Yamaha RX10RTL Supplemental Service Manual page 146

FUEL INJECTION SYSTEM
6. Verify the operation of the sensor or actua-
tor.
• Sensor operation
The data representing the operating condi-
tions of the sensor appears on the trip LCD.
• Actuator operation
Set the grip warmer adjustment down side
switch to "ON" to operate the actuator.
* If the grip warmer adjustment down side
switch is set to "ON", set it to "OFF", and
then set it to "ON" again.
7. Turn the main switch to "OFF" to cancel the
diagnostic mode.
NOTE: NOTE:
To perform a reliable diagnosis, make sure to
turn "OFF" the power supply before every
check and then start right from the beginning.
65
FI