Tighten the thumbscrews.
b.
Return the server to an upright position.
2.
Connect each power cord to the server.
3.
Connect each power cord to the power source.
4.
Power up the server (on page 18).
5.
Remove the front bezel
Power down the server (on page 18).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Remove the access panel (on page 18).
4.
Operations 20