HP ProLiant ML110 Gen9 User Manual page 52

Open the PCIe slot cover retainer and remove the slot 3 blank.
9.
Install the storage controller and close the PCIe slot cover retainer.
10.
If you installed a cache module on the storage controller, connect the cache module cable to the system
11.
board connector. For cache module cabling information, see "FBWC module cabling (on page 91)".
Connect all necessary cables to the storage controller and drive cage backplane. For internal drive
12.
cabling information, see "Storage cabling (on page 84)."
Install the system air baffle (on page 24).
13.
If removed, install the PCI air baffle
14.
Install the access panel (on page 19).
15.
Return the server to an upright position.
16.
Connect each power cord to the server.
17.
Connect each power cord to the power source.
18.
Power up the server (on page 18).
19.
("Install the PCI air baffle" on page 22).
Hardware options installation 52