HP ProLiant ML110 Gen9 User Manual page 76

Insert and install the RPS bracket into the bay.
9.
CAUTION: To prevent damage to other components in the server, insert the RPS enablement
option into the bay carefully.
Grab the power supply cables from the RPS backplane assembly and then insert the backplane into the
10.
bay carefully.
Connect the RPS backplane cables and then route the cables underneath the metal tabs:
11.
4 LFF non-hot-plug configuration
o
—
Optical drive power cable to optical drive
—
8-pin drive power cable to the non-hot-plug drive power connector
—
4-pin power cable to system board
—
6-pin power cable to GPU, if installed
—
RPSU cable to system board
Hardware options installation 76