System Fan Upgrade Option - HP ProLiant ML110 Gen9 User Manual

Install the PCI fan and connect the fan power cable.
6.
Install the system air baffle (on page 24).
7.
Install the PCI air baffle (on page 22).
8.
Install the access panel (on page 19).
9.
Return the server to an upright position.
10.
Connect each power cord to the server.
11.
Connect each power cord to the power source.
12.
Power up the server (on page 18).
13.

System fan upgrade option

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To install the component:
Power down the server (on page 18).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Remove the access panel (on page 18).
4.
If installed, remove the PCI air baffle (on page 22).
5.
Remove the system air baffle (on page 23).
6.
Hardware options installation 61