Remove the system air baffle (on page 23).
6.
Disconnect the existing Mini-SAS cables from the drive backplane and the Mini-SAS connectors on the
7.
system board.
Connect one end of the cable to the Host Bus Adapter, route the cable underneath the metal tabs, and
8.
then connect the other end to the drive backplane.
Two 4 LFF hot-plug drive cages connected to a H240 adapter
o
Item
Description
Port 1 controller connection
1
Box 1 drive backplane connection
2
Port 2 controller connection
3
Box 2 drive backplane connection
4
8 SFF hot-plug drive cage connected to a H240 adapter
o
Hardware options installation 44