Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Remove the access panel:
4.
Loosen the access panel thumbscrews.
a.
Slide and remove the access panel from the server.
b.
Remove the front bezel
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Remove the access panel (on page 25).
4.
Removal and replacement procedures 26