Lucent Technologies MDW 9031DCP Installation And Use Manual page 93

Handset
Performance /Range
Test in Wireless Test
Mode
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
The higher the number, the better the voice quality, as shown in the table below. A
low number may indicate potential interfering devices (such as another radio
transmitter) in the area. You can press 2 again to show a subsequent voice-
quality reading. Each time you press 2, you get a new reading.
Display Number
10
9
8
7
6
5
4
3
2
1
To determine power level, press 5.
9
The display shows the power level to which the handset (HS) and the base (B)
(the radio module) have adjusted. The power level adjusts from low power (1) to
high power (8) as the Pocket Phone is moved farther from its base. The following
display shows the Pocket Phone at its highest setting:
To exit Wireless Test Mode and Local Mode, press O.
10
Using the signal-strength test and the voice-quality test together, you can determine:
• if the installation has been done correctly.
if the handsets and bases are working properly.
•
• the range in which your MDW 9031/9031DCP Pocket Phone performs best at
your site.
Using the MDW 9031/9031DCP Pocket Phone
Voice Quality Is
Very Good
Very Good/almost error free
Errors, but not noticeable in normal
speech
Errors, but not noticeable in normal
speech
Noticeable noise
Noticeable noise
Noisy but intelligble speech
Noisy but intelligible speech
Garbled speech
Unintelligible speech
ON
3
Issue 3 October 1999 85