Lucent Technologies MDW 9031DCP Installation And Use Manual page 134

6
MDW 9031/9031DCP Pocket Phone Compatibility
126 Issue 3 October 1999
• To program the Ringing Option feature, use the "triangle" and "rectangle"
indicators in the display as the equivalent of red and green LEDs, respectively.
For MERLIN II System users, if you program an Auto Intercom button, idle line
•
preference must be set to intercom.
If any of your incoming lines has the call waiting feature, use the Recall feature
•
(letter "C" in the display) and press it before you pick up a waiting call. You can
dial #50 before you pick up a waiting call on the following: MERLIN
206/410/820 Systems only with Feature Package 2, and all MERLIN Plus,
MERLIN II, and MERLIN 1030/3070 Systems. Pressing the O button
disconnects the call.
The / button on the MDW 9031 allows you only to enter programming
•
mode. It does not work when using MERLIN LEGEND System features. To use
MERLIN LEGEND System feature codes with this phone, program any available
button as a System Feature button. This enables you to use the wide array of
MERLIN LEGEND System features by turning the set on, pressing the System
Feature button, and dialing the appropriate " * " code number.
Note:
MERLIN LEGEND does not support Caller ID and some other Display
features to Analog/Hybrid terminals, such as the MDW 9031.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
MDW 9031 Compatibility