Installing a Single Carrier
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
Installing the MDW 9031/9031DCP Pocket Phone
4
Remove the plastic cap covering each radio module
the radio modules into the carrier.
Starting from the leftmost slot (#1), insert each radio module into the carrier by
5
hooking it onto the radio module mounting rod. Slowly swing the radio module's
card edge into the card edge connector on the back of the carrier.
When the card edge is fully seated, a snap lock on the bottom of the radio module
6
will engage.
'
s card edge before inserting
Issue 3 October 1999 37
2