Lucent Technologies MDW 9031DCP Installation And Use Manual page 104

4
Maintaining the MDW 9031/9031DCP Pocket Phone
96 Issue 3 October 1999
2 Unplug the telephone line cord from the bottom of the radio module.
3 Press up and hold the snap lock on the bottom rear of the radio module.
Slowly swing the radio module's card edge out of the card edge connector on the
4
back of the carrier, releasing the snap lock when clear. Unhook the radio module
from the radio module mounting rod by gently lifting upward.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
Removing Radio Module from Carrier