Lucent Technologies MDW 9031DCP Installation And Use Manual page 47

Installing a Single Carrier
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
10 Plug the carrier's AC adapter cord into the left side of the carrier.
1
Insert the carrier's power cord into the AC adapter, then plug the power cord into
11
a properly grounded, 3-prong wall outlet that is not controlled by an on/off
switch.
If appropriate, you can wall-mount the AC adapter using its attached wall-
mounting bracket.
!
CAUTION:
Never connect or disconnect telephone line cords, or insert or remove radio
modules, while the carrier is plugged into the wall outlet.
Go to "Single Carrier Installation Self-Test" (page
12
Installing the MDW 9031/9031DCP Pocket Phone
2 3 4 5
40).
Issue 3 October 1999 39
2