Lucent Technologies MDW 9031DCP Installation And Use Manual page 92

3
Using the MDW 9031/9031DCP Pocket Phone
84 Issue 3 October 1999
6 To determine sound clarity, listen to the simulated dial tone as you walk around.
A clear, steady tone indicates good sound clarity.
7 To determine signal strength, press 1.
The display shows the signal strength (SIG) for both the handset (HS) and the
base (B) (the radio module) at the moment that 1 was pressed, using a number
from 1 to 10, as shown in the following display:
The higher the number, the stronger the signal, as shown in the following table.
You can press 1 again to show a subsequent signal-strength reading. Each time
you press 1, you get a new reading.
Display Number
10
9
8
7
6
5
4
3
2
1
To determine voice quality, press 2.
8
The display shows the voice quality (QUAL) for both the handset (HS) and the
base (B) (the radio module) using a number from 1 to 10, as shown in the
following display:
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166
ON
Signal Strength Is
Strong
Strong
Strong
Very Good
Very Good
Good
Good to Fair
Fair
Near end of range
Near end of range/loss of link
ON
Handset