Reposition The Touch Panel Interface - Barco DP2K-12C Installation Manual

3. Place the touch panel interface upon the mounting plate of the swivel arm and fasten the two wing nuts (W) as illustrated.
Image 7-5
Mount touch panel
4. Connect the circular plug of the multi cable with the circular socket at the rear side of the DP2K C-series projector.
Image 7-6
Connections
5. Attach the multi cable to the swivel arm using the two Velcro strips.
6. Connect the DC plug, the RJ45 Ethernet plug and the D-SUB plug into their respective sockets on the touch panel interface.
Image 7-7
Connections

Reposition the touch panel interface

7.3
How to reposition the touch panel interface?
1. Hold fast the touch panel interface.
2. Release the central swivel clamp by turning the big black knob (K) counterclockwise.
R5905050 DP2K C-SERIES 10/07/2012
W
7. Communicator touch panel
55