Lens Installation - Barco DP2K-12C Installation Manual

5. Lenses & lens holder
Image 5-11
2. Gently pull the lens out of the lens holder.
Image 5-12
Remove lens
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the removed
Lens to protect the optics of the Lens.
It's recommended to place the foam rubber of the original projector packaging, back in the Lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent the dust, emitted by
the foam, from entering the projector.
5.4

Lens installation

How to install a lens into the projector lens holder ?
1. Remove the foam rubber in the opening of the lens holder if not removed yet.
2. Take the lens assembly out of its packing material and remove the lens caps on both sides.
3. Close the lens locking mechanism prior to lens insertion (1). Lens locking mechanism is closed by pushing the lens lock to the
right.
40 R5905050 DP2K C-SERIES 10/07/2012