Barco DP2K-12C Installation Manual page 26

3. Physical installation
How to connect a UPS unit with the projector electronics?
1. Install the UPS unit according to the instructions of the manufacturer and the local regulations.
2. Connect the power output cord (reference 1) from the UPS unit with the UPS INLET socket of the projector (upper socket).
3. Secure the UPS INLET socket using the small fixation plate and two thumbscrews. Use appropriate spacers to ensure that the
plug is captured without play.
4. Install the large fixation plate (reference 2) upon the power OUTLET socket of the projector (lower socket). This to prevent losing
the fixation parts.
1
Image 3-12
C
AUTION
AC power supply cord (minimum 0,75 mm² or 18 AWG and minimum 300V)
C
AUTION
20
:
The electrical connection with the UPS INLET socket of the projector must be done with a certified
:
Do not use the power OUTLET socket of the projector to provide power to other equipment!
2
R5905050 DP2K C-SERIES 10/07/2012