Barco DP2K-12C Installation Manual page 47

3
2
Image 5-13
1 Lens holder lock
2 Power connector lens
3 Alignment pin
4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).
Note: The lens holder is placed default in the On-Axis position at factory.
5. Gently insert the lens in such a way that the lens connector matches the socket (B).
Image 5-14
6. Insert the lens until the connector seats into the socket.
Warning: Do not release the Lens yet, as the Lens may fall out of the Lens Holder.
A clear "click" should be heard when the retainer springs engage into the slot provided on the lens. Besides the clear click, the
springs actually help to guide the lens into position and hence prevent jamming.
7. Check if the lens is really secured by trying to pull the lens out of the lens holder.
C
AUTION
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
R5905050 DP2K C-SERIES 10/07/2012
1
:
Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
5. Lenses & lens holder
41