5. Lenses & lens holder
Image 5-24
Corner focusing
9. Repeat from step 6 until the projected focus pattern is as sharp as possible in the center, left, right, top and bottom of the screen.
How to fix the Scheimpflug
Start the fixation as follows (steps must be followed strictly) :
1. Turn in set screw A, B and C. Tighten lightly (by hand).
Tip:
Any movement of the image will affect the Scheimpflug adjustment
2. Fasten lock nuts a, b and c.
3. Turn in set screw D lightly (by hand) allowing the image to move slightly (1/3 to 1/2 of a square).
Image 5-25
4. Fasten lock nut d.
5. Tighten nut 4 until the offset of the image movement created in step 3 is canceled.
Tip:
The amount of image movement in step 3 will determine how tight the nut in step 5 will need to be turned to return the
image to its original position.
46
3
1/3 to 1/2
R5905050 DP2K C-SERIES 10/07/2012
F