Lp1
Lp2
DMD
Image 5-18
Scheimpflug principle
Scheimpflug principle
The "plane of sharp focus" can be changed so that any plane can be brought into sharp focus. When the DMD plane
and lens plane are parallel, the plane of sharp focus will also be parallel to these two planes. If, however, the lens
plane is tilted with respect to the DMD plane, the plane of sharp focus will also be tilted according to geometrical and
optical properties. The DMD plane, the principal lens plane and the sharp focus plane will intersect in a line below the
projector for downward lens tilt.
Scheimpflug adjustment points
1
4
Image 5-19
Scheimpflug adjustments
Indication on drawing
4
1, 2 and 3
A, B, C and D
a, b, c and d
1, 2 and 3 are adjustment points.
4 is a locking point and NOT used during Scheimpflug adjustment.
Necessary tools
•
Allen key 3 mm
•
Nut driver 13 mm
•
Nut driver 10 mm
How to adjust
1. Project a green focus pattern.
R5905050 DP2K C-SERIES 10/07/2012
A
a
B
b
2
3
c
d
C
D
Function
Locking nut
Scheimpflug adjustment nuts
Set screws
lock nuts
Fp1
Fp2
DMD
Lp3
Lp4
5. Lenses & lens holder
Fp4
Fp3
(Scheimpflug)
43