How To Perform Cleaning - Roland VersaUV LEC-300A User Manual

How to Perform Cleaning

Important Notes on This Procedure
Cleaning requires the included cleaning liquid and commercially available glass

cleaner. Have these on hand before you start.
Before attempting this operation, remove any media.

To prevent the print heads from drying out, finish this procedure in 10 minutes or

less.
A warning beep sounds after 10 minutes. At this time, stop work, attach the front

cover, and press
procedure from the beginning.
Never use any implement other than the included cleaning stick. Cotton swabs or

other lint-producing items may damage the heads.
Use one cleaning stick per cleaning session, then discard the stick after use. Reus-

ing cleaning sticks may reduce printing quality.
Never immerse a cleaning stick that has already been used to perform cleaning in

the cleaning liquid. Doing so may degrade the cleaning liquid.
Never touch the nozzle surface of the heads.

Stroke the sponges very gently, applying as little pressure as possible. Never rub,

scrape, or crush them.
CAUTION
1.
Change to the print-head manual-cleaning mode.

Remove any media.

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
CLEANING
. When the head-protection operation finishes, restart the
Be sure to perform operations as specified by these instructions,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Press
Press
Press
Press
Press
4-3 Cleaning Using the Cleaning Kit
.
several times.
.
.
.
Chapter 4 Maintenance and Adjustment
69