Printing The Amount Of Remaining Media; Printing A System Report - Roland VersaUV LEC-300A User Manual

Printing the Amount of Remaining Media

Procedure

MENU
SHEET REMAIN

SHHET REMAIN
PRINT MEMO

W 736 mm L 25.0 m
Description
This prints the amount of media remaining that is displayed at the top menu. You use this when you
want to make a record of the remaining length of the media now in use. Printing the amount of media
remaining before you change the media enables you to refer to the printed record and use the value
to make the setting for the remaining amount the next time you use the media.
Note, however, that continuing by performing the next print starts the print on top of the portion
where the amount of remaining media is printed. After printing the amount remaining, then before
you perform the next output operation, we recommend cutting off the media.

Printing a System Report

Procedure

MENU
SUB MENU

SUB MENU
SYSTEM REPORT

W 736mm
SETUP SHEET
ROLL
Description
This prints system information, including a list of setting values.
5-12 Viewing Information about the Media and the System
Press .
Press several times.
Press .
Press to perform printing.
Press .
Press to go back to the original screen.
Press .
Press several times.
Press .
Press several times.
Press to start printing.
Press .
Press to go back to the original screen.
Chapter 5 Feature Reference
137