Printing Media That Warps Easily - Roland VersaUV LEC-300A User Manual

5-3 Accommodating Various Kinds of Media
Description
Ink tends to collect on the surface of the heads when you use media prone to buildup of static charge,
when the ambient temperature is low, or when the head height is set to "HIGH. " Under some conditions,
this ink may be transferred to the media or cause dot drop-out. Use this feature at such times. The ink
buildup is removed as printing is performed.
When this is set to "PAGE," automatic cleaning is performed every time before printing starts.
When this is set to a value from "5 min" to "990 min," automatic cleaning is performed when the cumula-
tive printing time reaches the value you set here.
When this is set to "NONE," no automatic cleaning is performed.
Using "PAGE" or a value from "5 min" to "990 min," results in longer printing times. Also, when this is set
to a value from "5 min" to "990 min," printing pauses and so colors may be uneven.
 P. 105, "Adjusting Head Height to Match Media Thickness"
Default Setting
[PERIODIC CL.]: NONE

Printing Media That Warps Easily

1.
Change the setting for the [MEDIA CLAMP] menu item to [LONG].

MENU
MEDIA CLAMP

MEDIA CLAMP
SHORT

W 736mm
SETUP SHEET
ROLL
96
Chapter 5 Feature Reference
Press
Press
Press
LONG
Use
Press
Press
.
several times.
.
to select "LONG."
to enable the setting.
to go back to the original screen.