Printing Tests And Normal Cleaning - Roland VersaUV LEC-300A User Manual

Printing Tests and Normal Cleaning

We recommend performing a printing test to check for problems such as dot drop-out before you carry
out actual printing. If problems such as dot drop-out are found, clean the print heads.
How to Perform a Printing Test
Procedure
 Holding down
Hold down for
one second
or longer.

How to Perform Normal Cleaning
When a printing test reveals dot drop-out or the like, perform cleaning for just the group of heads that
is incapable of correct printing. Compared with performing cleaning for all heads, this can reduce the
amount of ink consumed.
Procedure

CLEANING
NORMAL CL.
for one second or longer prints a test pattern.
LEC-300A
Press .
2-4 Starting Printing
Printing test
LEC-330
A B
Dot drop-out
You can print the test pattern where you
want by using
to move the cutting carriage, then pressing
. The front cover may be left open
during movement, but be sure to close it
before you press
Chapter 2 Basic Operation
C
.
43