Speeding Up Printing For Narrow Media - Roland VersaUV LEC-300A User Manual

5-3 Accommodating Various Kinds of Media
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen
because it is warped or wrinkled, increasing the suction force may help correct the problem. Conversely,
when the media is flimsy and cannot move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media width.
You can also make this setting on the computer. When you have made the setting on the computer,
the computer's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO

Speeding Up Printing for Narrow Media

Procedure

MENU
SUB MENU

SUB MENU
FULL WIDTH S

FULL WIDTH S
FULL

W 736mm
SETUP SHEET
ROLL
Description
This shortens printing time by reducing the width of the print-head movement range to the minimum
necessary. This is effective when the width of the media or the printing data is narrow.
"FULL" sets the movement range of the print heads to the maximum width of loadable media.
"SHEET" matches the range of print-head movement to the width of the media.
"OFF" matches the range of print-head movement to the printing data. Movement is limited to the
minimum amount necessary, and this can be expected to yield the fastest printing.
Note, however, that the range of print-head movement is limited to the maximum scanning width that
is printed. Also, the maximum scanning width printed is reset every time printing of a page finishes.
94
Chapter 5 Feature Reference
Press
Press
Press
Press
Press
OFF
Use
Press
Press
Press
.
several times.
.
several times.
.
to select "SHEET" or "OFF."
to enable the setting.
.
to go back to the original screen.