Ricoh SG 2100N User Manual page 64

2. Preparing for Printing
9. Press the [#Enter] key.
PIN Method
1. Start the wireless LAN access point.
2. Switch on the machine.
3. Press the [ /Menu] key.
4. Press the [ ] or [ /Menu] key to display the [Host Interface] menu, and then press the
[#Enter] key.
Menu:
Host Interface
5. Press the [ ] or [ /Menu] key to display [Wireless LAN], and then press the [#Enter] key.
Host Interface:
Wireless LAN
6. Press the [ ] or [ /Menu] key to select [Easy Setup], and then press the [#Enter] key.
Wireless LAN:
Easy Setup
7. Press the [ ] or [ /Menu] key to select [Display PIN], and then press [#Enter] key.
Easy Setup:
Display PIN
8. Enter the machine's PIN on the access point web page.
For details, see the manual supplied with the wireless LAN access point.
9. Execute WPS (PIN system) from the access point's web page.
10. Press the [ ] or [ /Menu] key to select [PIN Method], and then press [#Enter] key.
Easy Setup:
PIN Method
11. Press the [#Enter] key.
Setting the SSID
To use wireless LAN, you must specify the Service Set Identifier (SSID) of the wireless access point that
the machine will connect to for network access. Ask your network administrator for the SSID to use.
1. Press the[ /Menu] key.
2. Press the [ ] or [ /Menu] key to display the [Host Interface] menu, and then press the [#Enter]
key.
62