Ricoh SG 2100N User Manual page 152

4. Machine Setup Menus
Contact your network administrator for information about the network configuration.
Default: [11.22.33.44]
IPv4 Subnet M.
You can specify the subnet mask.
When DHCP is set to on, the subnet mask cannot be changed. To change it, set DHCP to off.
Contact your network administrator for information about the network configuration.
Default: [0.0.0.0]
IPv4 Gatewy.Ad.
You can specify the IPv4 gateway address.
When DHCP is set to on, the gateway address cannot be changed. To change it, set DHCP to
off. Contact your network administrator for information about the network configuration.
Default: [0.0.0.0]
IPv6 DDNS
Specify the setting to update the host or domain name.
Default: [On]
IPv6 DNS
Specify the DNS server settings under IPv6.
If DHCP is off, enter the IPv6 addresses for the primary and secondary DNS servers in the
form "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" (where each x represents a digit).
Default: [::]
DHCPv6
You can specify whether or not to use DHCP in an IPv6 environment.
Default: [Off]
IPv6 Statlss Ad
Select whether to enable or disable IPv6 stateless address auto configuration.
Default: [On]
IPv6 Address
You can specify the machine's IPv6 address.
IPv6 Gatewy.Ad.
You can specify the IPv6 gateway address.
Default: [::]
Active Protocol
Select the protocol by setting the IPv4, IPv6, HTTP (IPv4), HTTP (IPv6), and Web protocols to
[Active] or [Not Active].
150